Monday, October 17, 2011

Crib Rail Protector Tutuorial

I have to say this is one of those baby things that I should have made or bought
that never crossed my mind. Its a crib gaurd.  A gaurd against what you may ask?
Well My 15 month olds teeth. For some odd reason she started chewing on her crib rails,
either before she goes to bed or when she wakes up, im not really shure. It honestly grosses
me out in a "nails-on-a-chalk-board" kind of way. I just imagine the grittyness of splinters of
wood in my mouth and get all tense and yuck feeling. I really didnt know what I could do to stop
 it either. I couldnt really catch her doing it or anything because i've never once walked in
when she was doing it. I threw around the idea of rubbing something nasty tasting on the rail
 so she would never want to do it again. I figured that anything gross enough to make her not
chew on it would probably take the varnish right off and ruin the wood.....soooo
I kinda just didnt figured i would'nt end up doing anything. Yesterday while dinking around on
I saw a pin that caught my eye. It looked like a tie on crib rail cushion, it was just on the front rail
so im assuming it was for mommy's arms when shes leaning over to lay her baby down.
The cushion sparked an idea and that same A.M. I was measuring and cutting fabric
for this teething gaurd. For some very odd reason my daughter has only marked one side as her
chewing territory so I just made one rail gaurd for my crib.

Crib Protector Tutorial

What You Will Need:
Measuring tape
Sewing machine
1/4" Elastic

Step 1:
Measure the length of the rail(s)
[mine was 27"]
Measure the wrap-around width of the rail, take your measuring tape and 
from one side of the rail wrap completley around to the other side of that same rail. This is going to be the part of the rail protector that hugs/wraps around the rail
 [mine was 7"]
Add a 1/4" to each measurement for seam allowance
So my measurment for rail gaurd was 27" long by 7" wide

Step 2:
You can go two ways with this part. You can either do a patchwork one like I did.
To do this you simply cut a bunch of fabric and sew them together.
I just cut the fabric chunks 7-1/4" long and made a bunch of varying widths that
equalled, sewn together, 27-1/4" long
Cut one piece of fabric to the exact measurement you needed.
It really just depends on the look youre going for.

Step 3:
Cut a second stip of fabric the size of your measurement (add 1/4" seam allowance to both sides).
I used a fleece material just so it would have some padding to it.
[again mine was 27-1/4" by 7-1/4"]

Step 4:
Lay the first piece of fabric flat, facing up. Then lay, face down, your second piece of fabric ontop of
your other piece. match your corners. Pin together.
Sew together LEAVING one of the short sides unsewn. (my short side was my 7" side)

Step 5:
Turn right side out by reaching into your unsewn short side and pulling outward.
To finish sewing your short side take the top of the fabric and tuck it into itself a 1/4"
Tuck/ fold it inward all the way around that short, unsewn side. pin the tucked part.
Sew the tucked part.

Step 6:
Now take it to your crib and set it on the rail.
Mark 4 spots to put your buttons that are not blocked by the rails that are
running up and down.
(If your making a rail protector for the longest front of back rails add 6 spots for buttons)
Now sew your buttons onto your marked spots, on the outside top part of your fabric, the long end. You'll want the buttons to show and thats why I said top part.

Step 7:
Cut 4 strips of  a 1-1/2"  elastic.
On the back side of the oppostite end from your buttons lay your elastic.
Loop it so that when you sew your elastic down it will make a loop.
Sew all your elastic down.

You're done!
Now just Wrap it on your rail by taking your elastic loops and wrapping them under the rail then around the buttons.
See 3rd photo from the top for a close up of what I mean

Saturday, October 08, 2011

Beginners Full Skirt Update

to view original post and the tutorial for this skirt go

I made this for a friend, I loved the material the picked out. I think it turned out really cute. She is about a foot shorter then me :) so it will not be this short! My husband said it looked like something he would have to talk me into buying at a store. Hes the sweetest.
Happy Sewing


Wednesday, October 05, 2011

70's Tunic Out Of Thrifted Clothing

My daughter was needing some long sleeved shirts for this fall and winter, so here is the first of many shirts her mamma will make her. She is the first of my husbands and I's kids (and only for right now), the first niece or nephew for my siblings, and the first grandbaby for my parents. Needless to say I have had to buy very few clothes, she has the largest wardrobe ever. Some mornings its a little chillly though and i've been fumbling as to what i'll put her in and since I live in the middle of nowhere, shopping trips must be planned. I wanted to make her some new outfits anyways, i've really been neglecting my friend, the sewing machine. For the pattern I simply "hacked" a dress she already had (which I explain 2 or 3 posts back) and shortened the length a little.

This thrift store find was the fabric i used for this tunic. I just love upcycling clothes! I'm pretty happy with how it turned out. Its sorta 70's, pin a feather in your hair-ish, and im groovin it :) haha im a dork. I wanted it a little longer but I miscalculated a little and thats alright. I added a little white pocket so it wouldnt be too, "blah", out of an old t-shirt of her daddy's. It'll be so cute with a white pair of leggins!

Yaaaah for Fall!

Related Posts Plugin for WordPress, Blogger...